Dispersants and Lubricants
Dispersion and lubrication systems are an indispensable part of processing techniques in industries such as plastics, coatings, stone, ceramics, and special applications, as well as new materials. The lubrication and dispersion products from FORNAX Chemica, represented by Huang Yao, provide optimal wetting effects during production, effectively assisting with molding, demolding, and dispersion.
-
FORNAWAX XS-326
Overview
Modified Polysiloxane Processing Aid
A modified polysiloxane product after surface treatment for:
● Polyolefins such as PE, PP
● Functional polymers such as PA6, PA66
● Filling base materials
● Industrial polymers
● MasterbatchesIndustries
Solutions
Application
● Improve processing fluidity of plastics and demolding performance.
● Reduce torque; reduce wearing of equipment and facilitate mold release.
● Reducing product defect rates.
● Significantly reduce friction coefficients and improve smooth performance.
● Improve surface gloss and enhance surface silk-like texture.
● Improve abrasion resistance and scratch resistance,
● Improve flame retardant performance;
● Reduce smoke density; and enhance the flame retardancy (high filling) material impact strength and surface gloss.
● Enhance good stability and prevent migration
● Reduces torque, improves melt index of wire and cable mixtures.
● Not recommended to use for transparent products. -
FORNAWAX XS-350
Overview
Modified Silicone Processing Aid
As organic silicon plastic processing aid with polarized groups at both ends; and as lubricatiing and dispersing agents for pigments and fillers:
● Polyolefins such as PE, PP
● Functional polymers such as PA6, PA66
● Filling base materials
● Industrial polymers
● MasterbatchesIndustries
Solutions
Application
Significantly disperse fillers and pigments:
● Significantly improve the dispersibility of fillers (such as flame retardants, glass fibers, etc.) during the extrusion process; thereby enhancing the flame retardant or mechanical properties of the products.
● Improve surface gloss and smoothness; eliminate surface defects caused by adding fillers (such as glass fibers); and reduce the defect rate.
● Increase the addition amount of fillers and reduce production costs.
Excellent lubricating performance:
● Increase speed of product extrusion; reduce defective rate; and improve the fluidity of plastic processing
● Reduce torque, and enhance mold release and demolding capabilities.
● Improve surface smoothness (hand feel), abrasion resistance, and scratch resistance of the products.
● Enhance self-cleaning performance of the products.
No migration, good stability:
● Good compatibility with polymer carriers, no progressive migration tendency. -
FORNAWAX 3A-740
Overview
Amide Wax
● Melting point: 190℃. Used as an additive for processing ultra-high temperature films (such as PI),
● Solving the problem of thermal weight loss of low-temperature processing additives.Industries
Solutions
Application
● Contains amide groups and polarized high carbon chains (better than oleic acid amides and erucic acid amides) ;
● Outstanding smoothness and anti adhesion properties. -
FORNAWAX 3A-735
Overview
Amide Wax
● Melting point aT 135℃. Used as an anti-adhesion agent for hightemperature plastic films (TPE/TPU) ;
● Effectively replacing montan wax for both internal and external lubrication.Industries
Solutions
Application
● Contains amide groups and polarized high carbon chains (better than oleic acid amides and erucic acid amides);
● Outstanding smoothness and anti-adhesion properties.
● Reducing friction coefficient to below 0.2. -
FORNAWAX 3E-402
Overview
Ethylene-Acrylate Copolymer Grafted Wax
PC/ABS AlloysIndustries
Solutions
Application
● As an interface compatibilizer with strong polarity;
● it is used for PC/ABS alloy to enhance compatibility and reduce the risk of forming stress cracking. -
FORNAWAX 3M-501
Overview
Polyethylene Wax Grafted with Maleic Anhydride (MAH)
Enhance the interfacial bonding between nylon PA66 and fiberglassIndustries
Solutions
Application
● High grafting rate; a compatibilizer withh strong – polarity interface;
● High acid value and is specifically designed to enhance the interfacial bonding between nylon PA66 and fiberglass;
● Effectively reducing the occurance of floating fibers. -
FORNAWAX 3V-203
Overview
Low Molecular Weight Ethylene-vinyl Acetate Copolymer Grafted Wax
Perfect for dispersion in carbon black systemIndustries
Solutions
Application
● Offers effective dispersion and lubricity.
● Enhances filler compatibility
● Provides excellent impact resistance and thermal sealability.
● Exhibits excellent resistance to light, water, and corrosion.
● Significantly enhances processing efficiency
● Contains functional groups; and a strong – polarity interface compatibilizer -
FORNAWAX AC-2220
Overview
Linear Polyethylene Wax with Medium Viscosity
Excellent internal and external lubrication; good dispersionIndustries
Solutions
Application
● Polyolefins such as PE, PP
● PVC processing lubricant
● Filler
● Predispersed pigment
● Masterbatch -
FORNAWAX XV-203
Overview
Low Molecular Weight Ethylene-vinyl Acetate Copolymer
Brand
FORNAWAX
Model No
XV-203
Industries
Solutions
Application
• Effective dispersion and lubricity
• Enhance filler compatibility
• Excellent impact resistance and thermal sealability
• Excellent light resistance, water resistance, corrosion resistance
• Significantly enhance production process efficiencySpecifications
Item Unit Typical Value / Properties Softening Point °C 101-107 Viscosity @140°C mPa·s 400-500 Hardness @25° 10-1mm ~3.0 Penetration 10-1mm ＜6 Density g/cm3 0.92 Acid Value mgKOH/g 13 Appearance White Powder -
FORNAWAX XS-320
Overview
Highly Amphiphilic Graft Copolymer
Industries
Solutions
Application
• Increase the loading capacity of pigments and fillers
• Significantly enhance the melt flow properties and increase the melt flow index
• Mitigate filament breakage and fiber strength reduction caused by pigment agglomeration during spinning; Reduce agglomeration formation and prevent re-agglomeration of fillers and pigments
• Improve the compatibility between fillers and matrix resin, enhancing the toughness of modified polymers
• Enhances the surface appearance and processing performance of modified polymers
• Improves production efficiency and molding yield rate
• Excellent thermal stabilitySpecifications
Item Unit Typical Value / Properties Dropping Point °C 130 Stacking Density kg/m3 0.5-0.6 Acid Value mgKOH/g 22 Appearance White Powder -
FORNAWAX XS-310
Overview
Highly Amphiphilic Copoly
Industries
Solutions
Application
• Increase the loading capacity of pigments and fillers
• Significantly enhance the melt flow properties and increase the melt flow index
• Mitigate filament breakage and fiber strength reduction caused by pigment agglomeration during spinning; Reduce agglomeration formation and prevent re-agglomeration of fillers and pigments
• Improve the compatibility between fillers and matrix resin, enhancing the toughness of modified polymers
• Enhances the surface appearance and processing performance of modified polymers
• Improves production efficiency and molding yield rate
• Excellent thermal stabilitySpecifications
Item Unit Typical Value / Properties Dropping Point °C 130 Viscosity @150°C mPa·s ＜1000 Appearance White Powder -
FORNAWAX OL-10
Overview
Oxidized Polyethylene Homopolymer
Industries
Solutions
Application
• The product exhibits higher melting and softening points than natural waxes and other synthetic waxes, with superior hardness compared to most natural waxes.
• Superior heat resistance and thermal stability.
• Excellent compatibility with polar polymers, inorganic compounds, metal compounds, and related
• Superior polishability, self-healing properties, scratch resistance, and durability.Specifications
Item Unit Typical Value / Properties Drop Melting Point °C 101 Viscosity @140°C cps 200 Hardness @25°C 10-1mm 3-6 Density g/cm3 0.93 Acid Value mgKOH/g 14-17 Appearance White Powder -
FORNAWAX OH-24
Overview
Low Molecular Weight Oxidized Polyethylene Wax
Industries
Solutions
Application
• Improve flowability of materials
• Adjust plasticizing time
• Improve product surface gloss
• Excellent dispersant and release agent
• Applied to transparent productsSpecifications
Item Unit Typical Value / Properties Softening Point °C 133 Viscosity @160°C mPa·s 8000-13000 Hardness @25°C 10-1mm ~1.0 Density g/cm3 0.99 Acid Value mgKOH/g 23-28 Appearance White Powder Size mm ＜1 -
FORNAWAX AC-2450
Overview
Low Molecular Weight Polyethylene Wax
Industries
Solutions
Application
• Improve flowability of materials
• Adjust plasticizing time
• Effective dispersing agent and release agent
• Paraffin crystal nucleator in wax blends such as candlesSpecifications
Item Unit Typical Value / Properties Softening Point °C 107 Viscosity @140°C mPa·s 400-500 Hardness @25°C 10-1mm >3.0 Density g/cm3 0.92 Appearance White Powder -
FORNAWAX AC-2030
Overview
Low Molecular Weight Polyethylene Wax
Industries
Solutions
Application
• Improve flowability of materials
• Adjust plasticizing time
• Improve the dispersion of inorganic substances
• Improve mold release and product surface glossSpecifications
Item Unit Typical Value / Properties Softening Point °C 106-110 Viscosity @140°C mPa·s 20-30 Hardness @25°C 10-1mm ~3.0 Penetration 10-1mm 1.0-3.0 Density g/cm3 0.92 Appearance White Powder
